Go To Content

Electric Vehicle Charging Stations


Electric Vehicle Car Charging Stations

Hines is proud to announce the installation of four (4) Juice Bar Electric Vehicle (EV) Charging Stations located on the P-1 Level of the Columbia Square parking garage. The charging stations are open to all drivers of plug-in vehicles from all major manufacturers including the Chevrolet Volt, the Nissan LEAF, and the Ford Focus EV.

Special points of interest:

  • There is no fee to charge your vehicle.

How To Use Car Charging Stations

LEVEL ONE
Use this method to charge at 120 V by plugging your own charging cord into the charging station's outlet.

To Start

  1. Plug your charging cord into your electric vehicle.
  2. Tap your Credit Card or ChargePass card on the station's reader symbol. When your card is authorized, the station displays a message indicating the door is unlocked and you can insert the plug. IMPORTANT! Cords with clear or transparent plugs will not work.
  3. Lift the door and plug your charging cord into the socket.
  4. Push the door closed to lock in place.
  5. Charging begins when the door locks. The station displays a message indicating the vehicle is charging.

To Stop

  1. Tap your credit card or ChargePass card on the station's reader symbol.
  2. The station displays a message indicating the door is unlocked and you can remove the charging cord.
  3. Remove your charging cord from the station's socket.
  4. Push the door closed to lock in place. REMEMBER! Remove your charging cord from your electric vehicle and take it with you.

LEVEL TWO
Use this method to charge at 240 V by plugging the station's connector into your electric vehicle.

To Start

  1. Tap your credit card or ChargePass card on the station's reader symbol.
  2. When your card is authorized, the station displays a message indicating you can remove the connector from the holster and plug it into your electric vehicle.
  3. Remove the charging station's connector by pressing down on the button at the top of the handle while pulling the connector from its holster. Plug the connector into your electric vehicle.
  4. The station displays a message indicating the vehicle is charging.

To Stop

  1. Tap your credit card or ChargePass card on the station's reader symbol.
  2. The station displays a message indicating that charging has finished and to return the connector to its holster.
  3. Return the station's connector to its holster by pressing down on the button at the top of the handle while pulling the connector from your electric vehicle.
  4. The station displays the charging duration and cost (if any) of your charging session.

Top of Page